|
All Products
P3 Ultimate Shooting Rest
P3 Ultimate Gun Vise
Compact Shooting Rest
Shooting Rest Attachment
Gun Vise Attachment
Pistol Post Add-On
P3 Ultimate Monopod
Ultimate Rail-Pod
Universal Brass Catcher
P3 Ultimate Target Stand
Bottle Holder
All Purpose Gun Level
AI Monopod
RPR Stock Bumper
RPR Mag Release Extension
CTK RPR Universal Bolt Knob
AR Sling Swivel Stud
Ruger Precision Rifle
Stock Bumper
Ruger Precision Rifle
Mag Release Extension
AR Buttstock Rail
Ultimate Rail-Pod
P3 Ultimate Target Stand
|
Home > Instructions AI Monopod
| | |
|
Return to AI Monopod
AI Monopod Instructions
|
|
Rifle Monopod Parts List
1. Main Body
2. Cam Lock Set Screw
3. Guide Set Screw
4. 1/4"- 28 Bolt
5. Spring Guide
6. Spring
7. Main Stud
8. Cam
9. Stud ORing
10. Thumb Wheel
11. Roller Bearing
12. Washer
13. Foot
14. Shoulder Bolt
15. Recoil Pad Bolt
|
AI Monopod Features
AI Monopod Installation
AI Monopod Instructions - Amendment
 AI Monopod Usage
Step 1:
Unthread the 2nd Stage a few turns so there will be movement up and down for fine tuning.
Step 2:
Loosen up the 1st Stage Cam by turning it clockwise or counter clockwise. Let it pop out until it contacts the surface below.
Step 3:
If more length is required, unscrew more of the threaded 2nd Stage.
Step 4:
Move the firearm up and down until close to point of aim and Cam Lock it into place.
Step 5:
Make sure that the Cam Lock is tight or it will come loose when making the threaded fine tune adjustments.
Step 6:
Use the threaded 2nd Stage to make the fine elevation adjustments.
* When using 0 - 1 recoil pad spacers, install the #15 Bolt (see parts list at top of page) in the lower recoil pad bolt hole.
* The Cam Lock Set Screw (#2) may need to be adjusted periodically. To adjust, find the center of the Cam by moving it counterclockwise until it stops in the up and down slot. Now turn the Set Screw in until it bottoms on the Cam and back it out 3/8 of a turn. If the Set Screw turns freely, you must reapply Red Loctite to the threads.
| |
| | |
|
|